Graber® Solar Shades: Stratus (10% Openness)

Inside mount blinds will fit within the window casing for a clean, custom look.  Enter the actual size of your window casing, NOT the size of your old blind.  We will make the necessary deductions to make the blind fit properly.  Make sure your window meets the minimum inside mount specifications, or flush mount specifications if desired.

Outside mount blinds will be installed on the wall above the window, covering the window entirely.  Enter the size you want the finished product to be, including the desired overlap.  The ordered height will include the hardware for blinds and shades.  This option is required if your window is not deep enough to install the blind as an inside mount.

A continuous cord loop and clutch assembly that provides the mechanical advantage needed to raise large shades.  Cord loop remains the same length, regardless of shade position.  Available color-coordinated to fabric or as a stainless steel chain.

Note: To operate properly, the fabric on your shade will be up to 1 1/2" narrower than the width ordered.  Light seepage on the sides of the shade is inherent to the design of roller shades.  To reduce light seepage, consider ordering the shade as an outside mount.

A continuous cord loop and clutch assembly that provides the mechanical advantage needed to raise large shades.  Cord loop remains the same length, regardless of shade position.  Available color-coordinated to fabric or as a stainless steel chain.

Note: To operate properly, the fabric on your shade will be up to 1 1/2" narrower than the width ordered.  Light seepage on the sides of the shade is inherent to the design of roller shades.  To reduce light seepage, consider ordering the shade as an outside mount.

With safety and aesthetics in mind, the cordless roller shade eliminates unsightly dangling cords and chains that can be a concern around children and pets.  The unique double-brake design provides quiet, easy operation; the coordinated tassel offers a clever way to raise and lower the shade while keeping fabrics clean.

Note: cordless roller shades will be made with the fabric approximately 1" narrower than the width ordered, creating a 1/2" light gap on each side.  For best light control, select standard roll (instead of reverse roll).

Motorized operation raises and lowers shades with no external lift cords.  Come with plug-in power adapter with 25' cord.  Radio frequency wireless system operates shades within a 65-foot radius (no line of sight required) with your choice of remote control.  At least one control must be ordered to operate the shade; 1-Channel remotes operate all shades on that channel at once.  5-Channel remotes operate up to five separate shades or groups of shades.

Raise and lower the shade with an internal motor controlled with one of the available remote control options (at least one required per order).  Radio frequency remotes does not require line of site to operate.  Single-channel remotes control all shades at once, or 5-channel remotes control up to five separate shades or groups of shades independently.  Battery wands are prefilled with lithium batteries.  Battery wands are installed either above or beside the shade (for outside mounts) or behind (for inside mounts).

Fabric rolls off the front of the shade, hiding the fabric roll.  The fabric on a standard roll shade comes off the back of the roll, which exposes both the roll and the back of the fabric.  Reverse roll shades may offer less light control because the fabric hangs further from the window glass.

Fabric rolls off the back of the shade, allowing the fabric to hang closer to the window for optimal light control.  The back of the fabric will be visible on the roll.

An optional square-corner PVC, channel panel valance with coordinating fabric inserts.

This optional valance is a curved sleek, aluminum-extruded, fabric covered valance available with all lifting mechanisms.  The cassette valance is 3 7/8" tall and 4 1/8" deep.