Bali® Vinyl Vertical Blinds: S-Curved Lighthouse, Marble Sculptured & Quatico

Inside mount blinds will fit within the window casing for a clean, custom look.  Enter the actual size of your window casing, NOT the size of your old blind.  We will make the necessary deductions to make the blind fit properly.  Make sure your window meets the minimum inside mount specifications, or flush mount specifications if desired.

Outside mount blinds will be installed on the wall above the window, covering the window entirely.  Enter the size you want the finished product to be, including the desired overlap.  The ordered height will include the hardware for blinds and shades.  This option is required if your window is not deep enough to install the blind as an inside mount.

Choose the side of the blind on which the control cords for traversing the blind and rotating the vanes should be positioned.  Consider where the controls will be more easily accessible when the blind is installed; however, controls on the same side as the stack will be less noticeable.

A single wand controls both the traversing and rotation of the vanes.  Eliminates dangling cords and chains providing safe and smooth operation.  Wand is positioned on the traversing side of the blind (opposite from the stacking side).  Not available with split stack. 

Wand height is determined by finished blind height unless otherwise requested.  If blind height is 77" or less, wand height is 33"; from 77 1/8" - 92", wand height is 48"; over 92 1/2" wand height is 60".  For blinds less than 35" in height, wand will be taller than vanes and standard cord and chain would be recommended.

Choose the side of the blind on which the control cords for traversing the blind and rotating the vanes should be positioned.  Consider where the controls will be more easily accessible when the blind is installed; however, controls on the same side as the stack will be less noticeable.

Vanes will gather or "stack" on the left side of the window when the blind is drawn open.

Vanes will gather or "stack" on the right side of the window when the blind is drawn open.

The blind will open from the middle and vanes will gather evenly on either end of the window.

Ceiling brackets are required for inside mount installations, as the blind will be mounted to the inside top of the window casing.  For outside mount blinds, choose ceiling brackets only when the blind will actually be attached to the ceiling.

Wall mount brackets are for outside mount installations only and attach to the wall over the window or door (most common).

Features a dust cover and grooved edge which holds matching vane insert.  Two 5 1/2" returns are included for outside mount blinds.

Features curved corners for a smoother look.  5 1/2" returns and dust cover included.  For outside mount applications only.

Crafted from premium hardwood, the stately design of the Noble Wood Cornice lends an impressive appearance to your shade.  Available in stained or painted finishes and in either 5 1/2" or 7 1/2" sizes - the large size works best with large shades or to create a more dramatic effect.  Cornices with outside mount shades will have 5" returns and a dustcover to conceal the top of the shade; for inside shades, the cornice will be straight cut on the end with no returns or dustcover.  Cornices will ship separately from your shade - it is recommended to install shade and cornice at the same time.

Crafted from premium hardwood, the Regal Wood Cornice crowns your blinds with style and sophistication.  Available in stained or painted finishes and in either 5 1/2" or 7 1/2" sizes - the large size works best with large blinds or to create a more dramatic effect.  Cornices with outside mount blinds will have 5" returns and a dustcover to conceal the top of the blind; for inside blinds, the cornice will be straight cut on the end with no returns or dustcover.  Cornices will ship separately from your blind - it is recommended to install blind and cornice at the same time.  Cornices wider than 92" will be sent in two or three sections and will need to be spliced together.