Bali® Sliding Panels: Damask & Ravish

Inside mount blinds will fit within the window casing for a clean, custom look.  Enter the actual size of your window casing, NOT the size of your old blind.  We will make the necessary deductions to make the blind fit properly.  Make sure your window meets the minimum inside mount specifications, or flush mount specifications if desired.

Outside mount blinds will be installed on the wall above the window, covering the window entirely.  Enter the size you want the finished product to be, including the desired overlap.  The ordered height will include the hardware for blinds and shades.  This option is required if your window is not deep enough to install the blind as an inside mount.

Choose the side of the blind on which the control cord for traversing the blind should be positioned.  Consider where the cord will be more easily accessible when the blind is installed; however, controls on the same side as the stack will be less noticeable.

Choose the side of the blind on which the control cord for traversing the blind should be positioned.  Consider where the cord will be more easily accessible when the blind is installed; however, controls on the same side as the stack will be less noticeable.

A single wand traverses the blind, eliminating dangling cords.  Wand will be positioned on the opposite side of the stack.

Panels will gather or "stack" on the left side of the window when the blind is drawn open.

Panels will gather or "stack" on the right side of the window when the blind is drawn open.

The blind will open from the middle and panels will gather evenly on either end of the window.

The 3-panel configuration is for side stack blinds only with all panels stacking on one side; panel size will vary based on the ordered width.  Panels will overlap 4".  The "stack" or covered area is equal to the size of one panel.  For help determining panel size or to order the blind to stack completely off the window, contact our sales team.

This 4-panel configuration is for side stack blinds only with all panels stacking on one side; panel size will vary based on the ordered width.  Panels will overlap 4".  The "stack" or covered area is equal to the size of one panel.  For help determining panel size or to order the blind to stack completely off the window, contact our sales team.

This 4-panel configuration is for split stack blinds only - two panels will stack on either side of the blind.  Panel size will vary based on the ordered width.  Panels will overlap 4".  The "stack" or covered area is equal to the size of one panel.  For help determining panel size or to order the blind to stack completely off the window, contact our sales team.

The 5-panel configuration is for side stack blinds only with all panels stacking on one side; panel size will vary based on the ordered width.  Panels will overlap 4".  The "stack" or covered area is equal to the size of one panel.  For help determining panel size or to order the blind to stack completely off the window, contact our sales team.

The 6-panel configuration is for split stack blinds only - three panels will stack on either side of the blind.  Panel size will vary based on the ordered width.  Panels will overlap 4".  The "stack" or covered area is equal to the size of one panel.  For help determining panel size or to order the blind to stack completely off the window, contact our sales team.

The 8-panel configuration is for split stack blinds only - four panels will stack on either side of the blind.  Panel size will vary based on the ordered width.  Panels will overlap 4".  The "stack" or covered area is equal to the size of one panel.  For help determining panel size or to order the blind to stack completely off the window, contact our sales team.

A square-corner PVC channel panel valance is available to provide a more finished look for your shade - matching fabric will be inserted into the channels.

Crafted from premium hardwood, the stately design of the Noble Wood Cornice lends an impressive appearance to your shade.  Available in stained or painted finishes and in either 5 1/2" or 7 1/2" sizes - the large size works best with large shades or to create a more dramatic effect.  Cornices with outside mount shades will have 5" returns and a dustcover to conceal the top of the shade; for inside shades, the cornice will be straight cut on the end with no returns or dustcover.  Cornices will ship separately from your shade - it is recommended to install shade and cornice at the same time.

Create a distinguished matching top treatment with the 8" Fabric-Wrapped Cornice.  Polyester batting under the fabric creates an upholstered appearance; a white fabric liner covers the dust cover and inside of the cornice for a finished look.  Available on outside mount shades only - cornice will be made to fit over shade and thus will be approximately 3" wider than shade width.  Comes with 6" returns.  Fabric will be turned width for height - visible patterns will be perpendicular to the pattern on the shade.

Crafted from premium hardwood, the Regal Wood Cornice crowns your blinds with style and sophistication.  Available in stained or painted finishes and in either 5 1/2" or 7 1/2" sizes - the large size works best with large blinds or to create a more dramatic effect.  Cornices with outside mount blinds will have 5" returns and a dustcover to conceal the top of the blind; for inside blinds, the cornice will be straight cut on the end with no returns or dustcover.  Cornices will ship separately from your blind - it is recommended to install blind and cornice at the same time.  Cornices wider than 92" will be sent in two or three sections and will need to be spliced together.