Bali® Custom Tailored Roman Shades: Dupioni Silk & Silk Stripe

Inside mount blinds will fit within the window casing for a clean, custom look.  Enter the actual size of your window casing, NOT the size of your old blind.  We will make the necessary deductions to make the blind fit properly.  Make sure your window meets the minimum inside mount specifications, or flush mount specifications if desired.

Outside mount blinds will be installed on the wall above the window, covering the window entirely.  Enter the size you want the finished product to be, including the desired overlap.  The ordered height will include the hardware for blinds and shades.  This option is required if your window is not deep enough to install the blind as an inside mount.

Standard cord lift with a cord lock mechanism for reliable and easy positioning of the shade.  Simply pull the cord to raise to the desired height, and the cord locks in place.  Pull the cord slightly to release and lower the shade.  Cord will be located behind shade and is color-coordinated to the liner for a uniform appearance to the outside.

Enjoy having both light and privacy in one shade.  Use the left cord to lower your shade from the top to let in any amount of light while maintaining privacy at the bottom of the window.  When you want to fully open the shade, lower it completely from the top, or raise it from the bottom with the right cord.  Cords will be located behind the shade and are color coordinated to the liner for a uniform appearance to the outside.  Valance is standard with this option - specify valance height below.

A single continuous loop stainless steel bead chain allows you to raise or lower your shade smoothly and easily, providing easier operation of larger shades.  Bead chain length remains the same, regardless of shade position.  Chain length will be approximately 3/4 the length of the shade unless otherwise specified.

All shades are available with a liner to protect the fabric, provide a uniform appearance to the outside and reduce light shining through the shade.  The privacy liner is off-white, made from an 80/20 polyester/cotton blend.

This optional liner substantially reduces light shining through the shade and provides a neutral backdrop when viewed from the outside.  Does not provide blackout light control - opacity will vary based on shade fabric.  Made from an 80/20 polyester/cotton blend.

This style is especially suited to patterned fabrics to provide an uninterrupted view of the pattern.  Seamless front panel folds up neatly at the top when fully raised.  Folds are spaced at approximately 7" to 11" intervals, depending on shade height.  Note that shades wider than fabric width may be seamed vertically in three panels.  Stitches used to attach the cord rings on the back of the shade are visible on the front of shade.

Seamed horizontal pleats give the shade a classic look.  Patterned fabrics made in this style will have the pattern interrupted at each pleat.  Pleats are spaced at approximately 7" to 11" intervals, depending on shade height.  Note that shades wider than fabric width may be seamed vertically in three panels; patterned fabrics may not be aligned.

Soft folds cascade down the front panel at approximately 5.5" to 8" intervals, depending on shade height.  When raised, shade folds up evenly to the top.  Patterned fabrics made in this style will have the pattern interrupted at each pleat.  Note that shades wider than fabric width may be seamed vertically in three panels; patterned fabrics may not be aligned.

Available in 6", 8" or 10" lengths.  Valance returns are included for outside mount shades to provide a finished look similar to a fabric-wrapped cornice box.  Valance lengths are recommended as follows: 6" valance for shades up to 60" long; 8" valance for shades up to 90" and 10" valance for shades up to 120" in length.

Crafted from premium hardwood, the stately design of the Noble Wood Cornice lends an impressive appearance to your shade.  Available in stained or painted finishes and in either 5 1/2" or 7 1/2" sizes - the large size works best with large shades or to create a more dramatic effect.  Cornices with outside mount shades will have 5" returns and a dustcover to conceal the top of the shade; for inside shades, the cornice will be straight cut on the end with no returns or dustcover.  Cornices will ship separately from your shade - it is recommended to install shade and cornice at the same time.

Crafted from premium hardwood, the Regal Wood Cornice crowns your blinds with style and sophistication.  Available in stained or painted finishes and in either 5 1/2" or 7 1/2" sizes - the large size works best with large blinds or to create a more dramatic effect.  Cornices with outside mount blinds will have 5" returns and a dustcover to conceal the top of the blind; for inside blinds, the cornice will be straight cut on the end with no returns or dustcover.  Cornices will ship separately from your blind - it is recommended to install blind and cornice at the same time.  Cornices wider than 92" will be sent in two or three sections and will need to be spliced together.

You can create your own matching accessories using the same fabric as your roman shade.  Choose this option for one yard of fabric in the same color as your shade.  Fabric width is indicated in the Specifications tab above.

You can create your own matching accessories using the same fabric as your roman shade.  Choose this option for one yard of fabric in the same color as your shade.  Fabric width is indicated in the Specifications tab above.