Levolor® Fabric Vertical Blinds: Linen

Inside mount blinds will fit within the window casing for a clean, custom look.  Enter the actual size of your window casing, NOT the size of your old blind.  We will make the necessary deductions to make the blind fit properly.  Make sure your window meets the minimum inside mount specifications, or flush mount specifications if desired.

Outside mount blinds will be installed on the wall above the window, covering the window entirely.  Enter the size you want the finished product to be, including the desired overlap.  The ordered height will include the hardware for blinds and shades.  This option is required if your window is not deep enough to install the blind as an inside mount.

Choose the side of the blind on which the control cords for traversing the blind and rotating the vanes should be positioned.  Consider where the controls will be more easily accessible when the blind is installed; however, controls on the same side as the stack will be less noticeable.  Required when ordering blind with Backstacker option.

Choose the side of the blind on which the control cords for traversing the blind and rotating the vanes should be positioned.  Consider where the controls will be more easily accessible when the blind is installed; however, controls on the same side as the stack will be less noticeable.  Required when ordering blind with Backstacker option.

Decorative Traditional Wand available in Bronze finish.

Decorative Traditional Wand available in Off White finish.

Decorative Traditional Wand available in Satin Nickel finish.

Decorative Traditional Wand available in White finish.

Decorative Transitional Wand available in Bronze finish.

Decorative Transitional Wand available in Off White finish.

Decorative Transitional Wand available in Satin Nickel finish.

Decorative Transitional Wand available in White finish.

Vanes will gather or "stack" on the left side of the window when the blind is drawn open.

Vanes will gather or "stack" on the right side of the window when the blind is drawn open.

The blind will open from the middle and vanes will gather evenly on either end of the blind.

Choose the Backstacker option when you want a less obstructed view.  Backstacker blinds are pulled open from the back of the vane stack first, allowing them to stack more compactly at the window’s edge.  This option also eliminates bothersome swaying of vanes after opening or closing.  Left stacking means the blind will stack on the left hand side of the window when open.  Not available with wand control.

The Backstacker option with the blind stacking on the right hand side of the window when open.  Not available with wand control.

The Backstacker feature with split stacking, meaning the blind will be drawn from the center of the window and stack evenly on both the left and right hand sides when open.  Not available with wand control.

Ceiling brackets are required for inside mount installations, as the blind will be mounted to the inside top of the window casing.  For outside mount blinds, choose ceiling brackets only when the blind will actually be attached to the ceiling.

Wall mount brackets are for outside mount installations only and attach to the wall over the window or door (most common).

Optional valance with inserted fabric in a clear channel to create a soft look from top to bottom.  Fabric material is rotated 90 degrees (not recommended with Samara and Fabricio styles).

An elegant faux wood valance takes your room to the next level of style.  Available in all vane styles.  Coordinates with Levolor 2" Visions Faux Wood Blinds.

An elegant faux wood valance takes your room to the next level of style.  Available in all vane styles.

An elegant faux wood valance takes your room to the next level of style.  Available in all vane styles.