Levolor® Accordia™ Double Cell Cellular Shades: Designer Colors Light Filtering

Inside mount blinds will fit within the window casing for a clean, custom look.  Enter the actual size of your window casing, NOT the size of your old blind.  We will make the necessary deductions to make the blind fit properly.  Make sure your window meets the minimum inside mount specifications, or flush mount specifications if desired.

Outside mount blinds will be installed on the wall above the window, covering the window entirely.  Enter the size you want the finished product to be, including the desired overlap.  The ordered height will include the hardware for blinds and shades.  This option is required if your window is not deep enough to install the blind as an inside mount.

Standard cord lift with a cord lock mechanism for reliable and easy positioning of the shade.  Simply pull the cord to raise to the desired height, and the cord locks in place.  Pull the cord slightly to release and lower the shade.  Cord can be positioned on either side of the blind.

The Continuous Cordloop option helps easily raise larger shades evenly while keeping them at exactly the height you want without having to lock or unlock the cord.  Simply pull the cord until the shade is at the desired height and the shade stays in place while maintaining the same cord length.

Effortlessly raise and lower your shade with a gentle push or pull on the bottomrail.  Cordless lift shades are the safest window treatment alternative for children and pets.  They also offer added convenience and an uncluttered look.

Now you can enjoy the beauty and warmth of incoming light and your privacy at the same time.  Top Down/Bottom Up allows you to adjust the top independently from the bottom letting sunlight in while maintaining your privacy.  Two separate cords will operate the shade - one on the right to raise and lower the shade from the bottom, and one on the left to raise and lower the shade from the top.

Want even more versatility? Combine Levolor's Cordless Lift System with Top Down/Bottom Up engineering.  This shade can be lowered from the top or raised from the bottom all with the ease and safety of cord-free operation.

Decorative drapery hardware valances will add an upscale style and a timeless elegance to your custom shades.  Coordinate finials and finishes to match your floors and furniture for the ultimate fashion statement.  Available for outside mount only.  Valance is in the style of traditional drapery hardware and is not intended to be used to hold drapery.  Finials require additional 7" clearance on each side of shade; end caps require 1 1/2" on each side.  Not available on butting blinds or for side-by-side shades.