Comfortex® Envision® Panel Track Blinds: Shantung

Inside mount blinds will fit within the window casing for a clean, custom look.  Enter the actual size of your window casing, NOT the size of your old blind.  We will make the necessary deductions to make the blind fit properly.  Make sure your window meets the minimum inside mount specifications, or flush mount specifications if desired.

Outside mount blinds will be installed on the wall above the window, covering the window entirely.  Enter the size you want the finished product to be, including the desired overlap.  The ordered height will include the hardware for blinds and shades.  This option is required if your window is not deep enough to install the blind as an inside mount.

Choose the side of the blind on which the control cord for traversing the blind should be positioned.  Consider where the cord will be more easily accessible when the blind is installed; however, controls on the same side as the stack will be less noticeable.  Note: Cord color is White

Choose the side of the blind on which the control cord for traversing the blind should be positioned.  Consider where the cord will be more easily accessible when the blind is installed; however, controls on the same side as the stack will be less noticeable.  Note: Cord color is White

A single wand traverses the blind, eliminating dangling cords.  Wand will be positioned on the opposite side of the stack.  (Wand Color is white)

Panels will gather or "stack" on the left side of the window when the blind is drawn open.

Panels will gather or "stack" on the right side of the window when the blind is drawn open.

The blind will open from the middle and panels will gather evenly on either end of the window.

The 3-panel configuration is for side stack blinds only with all panels stacking on one side; panel size will vary based on the ordered width.  Panels will overlap 1 1/2".  The "stack" or covered area is equal to the size of one panel, and can be determined by dividing the ordered width by the number of panels (within +/- 1 1/2").  For help ordering a panel track to stack completely off the window, contact our sales team.

This 4-panel configuration is for side stack blinds only with all panels stacking on one side; panel size will vary based on the ordered width.  Panels will overlap 1 1/2".  The "stack" or covered area is equal to the size of one panel, and can be determined by dividing the ordered width by the number of panels (within +/- 1 1/2").  For help ordering a panel track to stack completely off the window, contact our sales team.

This 4-panel configuration is for split stack blinds only - two panels will stack on either side of the blind.  Panel size will vary based on the ordered width.  Panels will overlap 1 1/2".  The "stack" or covered area is equal to the size of one panel, and can be determined by dividing the ordered width by the number of panels (within +/- 1 1/2").  For help ordering a panel track to stack completely off the window, contact our sales team.

The 5-panel configuration is for side stack blinds only with all panels stacking on one side; panel size will vary based on the ordered width.  Panels will overlap 1 1/2".  The "stack" or covered area is equal to the size of one panel, and can be determined by dividing the ordered width by the number of panels (within +/- 1 1/2").  For help ordering a panel track to stack completely off the window, contact our sales team.

The 6-panel configuration is for split stack blinds only - three panels will stack on either side of the blind.  Panel size will vary based on the ordered width.  Panels will overlap 1 1/2".  The "stack" or covered area is equal to the size of one panel, and can be determined by dividing the ordered width by the number of panels (within +/- 1 1/2").  For help ordering a panel track to stack completely off the window, contact our sales team.

The 8-panel configuration is for split stack blinds only - four panels will stack on either side of the blind.  Panel size will vary based on the ordered width.  Panels will overlap 1 1/2".  The "stack" or covered area is equal to the size of one panel, and can be determined by dividing the ordered width by the number of panels (within +/- 1 1/2").  For help ordering a panel track to stack completely off the window, contact our sales team.

Optional 3" tall valance with matching fabric insert strip is available to complete your look and to cover the track, if desired.  Outside mount valances do not have returns on the side and are made to the ordered size plus 1" on the outside of the valance.