Blindsgalore logo

Comfortex® Envision® Panel Track Blinds: SilverScreen Reflective Fabric (4% Openness)

Product Overview

$317.00
(24" x 36")
Change
$473.28
33% off
Current offers:
  • 33% Off Plus -
    Save 20%
    Use coupon YOUPICK20
    Expires 5/22/2013
Shipping:
Free Shipping†
Special offer:
BillMeLater®

Please Note: Panel tracks are ordered using the overall width of the area being covered, not using individual panel sizes. 

Comfortex Sliding Panels offer a modern alternative to standard window treatments.  Perfect for patio doors, wide windows or as a room divider, these versatile panels slide along a smooth operating aluminum track.  Solar shades allow you to maintain your view to the outside as they minimize glare on TVs and home office computers, block damaging UV rays and reduce heat transmittance.  SilverScreen fabric has a 4% openness factor for high light control and low view-through. 
Note: The fabric on your shade will be 7/8" narrower than the width ordered (Outside Mount - Cord Option), The fabric on your shade will be 2 3/4" narrower than the width ordered (Outside Mount - Wand Option)

Overall Customer RatingNot yet rated - be the first to review this productBe the first to write a review.

System requirements

BlindsGalore supports the following web browsers:

  • IE 6.0+
  • Firefox 2.0+
  • Safari 3.1+
  • Google Chrome

If you are using one of these browsers and are encountering problems, please make sure JavaScript is enabled and refresh the page.

If the problem persists, you may contact us toll-free at (877) 702-5463 to place an order.

  • SilverScreen 4% Openness is 35% fiberglass, 65% vinyl on fiberglass with a 4% openness
  • Fabric color shows to interior and to street
  • Note: inside mount shades will have up to a 3/4" light gap on each side; outside mount shades will be 3/16" wider than ordered width
  • SilverScreen 4% has passed the ASTM-G21 and ASTM-G22 tests for bacterial and fungal resistance
  • SilverScreen 4% is flame retardant (meets M1, California U.S. Title 19 Small Scale, NFPA701-1999 TM #1 Small Scale, NFPA 101 Class A rating, and UBC Class 1 specifications)
  • Features a fabric-wrapped elliptical bottom rail for an attractive, finished appearance
  • Backed by a Lifetime Limited Warranty
  • Specifications
  • Width 24" - 192"
  • Height 24" - 144"
  • Minimum inside-mount depth 2"
  • Minimum flush-mount depth 3 1/8"
  • Minimum outside-mount space 2"

Please note the following exceptions to the above specifications.

  • Wand Control Type
  • Height 24" - 108"
  • 4 (Side Stack) Panel
  • Width 32" - 192"
  • 4 (Split Stack) Panel
  • Width 32" - 192"
  • 5 (Side Stack) Panel
  • Width 40" - 192"
  • 6 (Split Stack) Panel
  • Width 48" - 192"
  • 8 (Split Stack) Panel
  • Width 54" - 192"
  • Split Stack
  • Width 60" - 192"

Your browser is currently running with add-ons disabled.

To customize this product, please make sure that your browser's add-ons and plug-ins are enabled.

Order your blind by following the easy steps below!
step 1

Select a product color: (5 available)

Learn more
White - 200ED01
  • Add free sample to cart
  • White 200ED01
White - 200ED01
Beige - 200ED02
Light Grey - 200ED03
Dark Grey - 200EB02
Black - 200EB01
step 2

Select a mount option:

What are my mount options?
Inside

Inside

Inside mount blinds will fit within the window casing for a clean, custom look.  Enter the actual size of your window casing, NOT the size of your old blind.  We will make the necessary deductions to make the blind fit properly.  Make sure your window meets the minimum inside mount specifications, or flush mount specifications if desired.

Outside mount blinds will be installed on the wall above the window, covering the window entirely.  Enter the size you want the finished product to be, including the desired overlap.  The ordered height will include the hardware for blinds and shades.  This option is required if your window is not deep enough to install the blind as an inside mount.

step 3

Select a size

Need help measuring?
Single

Single

Learn more about headrail options

Width: inches

Height: inches

Center blind

Width:

Height:

Right blind

Width:

Height:

step 4

Select a control type option:

Learn more about control type
Wand

Wand

Choose the side of the blind on which the control cord for traversing the blind should be positioned.  Consider where the cord will be more easily accessible when the blind is installed; however, controls on the same side as the stack will be less noticeable.  Note: Cord color is White

Choose the side of the blind on which the control cord for traversing the blind should be positioned.  Consider where the cord will be more easily accessible when the blind is installed; however, controls on the same side as the stack will be less noticeable.  Note: Cord color is White

A single wand traverses the blind, eliminating dangling cords.  Wand will be positioned on the opposite side of the stack.  (Wand Color is white)

step 5

Select a stack option:

What are my stack options?
Left Side

Left Side

Panels will gather or "stack" on the left side of the window when the blind is drawn open.

Panels will gather or "stack" on the right side of the window when the blind is drawn open.

The blind will open from the middle and panels will gather evenly on either end of the window.

step 6

Select a panel option:

What are my panel options?
3 (Side Stack)

3 (Side Stack)

The 3-panel configuration is for side stack blinds only with all panels stacking on one side; panel size will vary based on the ordered width.  Panels will overlap 1 1/2".  The "stack" or covered area is equal to the size of one panel, and can be determined by dividing the ordered width by the number of panels (within +/- 1 1/2").  For help ordering a panel track to stack completely off the window, contact our sales team.

This 4-panel configuration is for side stack blinds only with all panels stacking on one side; panel size will vary based on the ordered width.  Panels will overlap 1 1/2".  The "stack" or covered area is equal to the size of one panel, and can be determined by dividing the ordered width by the number of panels (within +/- 1 1/2").  For help ordering a panel track to stack completely off the window, contact our sales team.

This 4-panel configuration is for split stack blinds only - two panels will stack on either side of the blind.  Panel size will vary based on the ordered width.  Panels will overlap 1 1/2".  The "stack" or covered area is equal to the size of one panel, and can be determined by dividing the ordered width by the number of panels (within +/- 1 1/2").  For help ordering a panel track to stack completely off the window, contact our sales team.

The 5-panel configuration is for side stack blinds only with all panels stacking on one side; panel size will vary based on the ordered width.  Panels will overlap 1 1/2".  The "stack" or covered area is equal to the size of one panel, and can be determined by dividing the ordered width by the number of panels (within +/- 1 1/2").  For help ordering a panel track to stack completely off the window, contact our sales team.

The 6-panel configuration is for split stack blinds only - three panels will stack on either side of the blind.  Panel size will vary based on the ordered width.  Panels will overlap 1 1/2".  The "stack" or covered area is equal to the size of one panel, and can be determined by dividing the ordered width by the number of panels (within +/- 1 1/2").  For help ordering a panel track to stack completely off the window, contact our sales team.

The 8-panel configuration is for split stack blinds only - four panels will stack on either side of the blind.  Panel size will vary based on the ordered width.  Panels will overlap 1 1/2".  The "stack" or covered area is equal to the size of one panel, and can be determined by dividing the ordered width by the number of panels (within +/- 1 1/2").  For help ordering a panel track to stack completely off the window, contact our sales team.

step 7

Select a valance option:

What are my valance options?
No valance

No valance

Optional 3" tall valance with matching fabric insert strip is available to complete your look and to cover the track, if desired.  Outside mount valances do not have returns on the side and are made to the ordered size plus 1" on the outside of the valance.

Valance size: 3"
last step!

Optional information:

Learn more

Please address the following issues to continue:
You're done!

Custom Product Price

1.

Primary Product Color:

[edit]
Color:
White
2.

Mount:

[edit]
Type:
n/a
3.

Size:

[edit]
Width x Height:
24" x 36"
4.

Control Type:

[edit]
Option:
n/a
5.

Stack:

[edit]
Option:
n/a
6.

Panel:

[edit]
Option:
n/a
7.

Valance:

[edit]
Type:
n/a
Size:
n/a
Opt.

Information:

[edit]
Room:
n/a
Nickname:
n/a
$473.28
- $156.28
33% off
$317.00

* Price is not complete until all sizes and options have been selected. Coupon discount reflected in cart.

$473.28
- $156.28
33% off
$317.00

Coupon discount reflected in cart.

Need Help?

Do It Yourself Guides, Expert Advice and Learn About an In-Home Consultation.

501