Blindsgalore logo

Good Housekeeping™ Sheer Shades: 2" Light Filtering

  • $200.00
  • Retail $298.60

    (33% off)

    Enjoy these special savings

    • Save Today 33% -
      Save 33%
    • + an extra -
      Save 10% Use coupon LOVEBG
      Expires 2/11/2016
  • Blindsgalore Guarantee
  • + an extra 10% off
    use code LOVEBG at checkout Expires 2/11
Overall Customer Rating5 stars from 1 reviewRead reviewsWrite a review
24" x 36"
pick your size

Change the size:

Width: inches

Height: inches

update

Now you can have highly-sought after, yet affordable, Sheer Horizontal Shades from Good Housekeeping, a name you know you can trust.  These Sheer Shades function like a blind, but use the beauty of soft fabric vanes between two layers of sheer material to filter light and provide privacy when you need it.  When the vanes are open, and the blind is down, your view is filtered through the sheer fabric for an elegant look.  The 2" vane size is just right for most windows.  These custom shades are backed by the integrity of the Good Housekeeping Seal, so you can buy with confidence.  Please note: For proper operation, your shade fabric may be made up to 1 1/4" narrower than the width you order; this can create a 5/8" light gap on each side.

  • Good Housekeeping sheer shades have been granted the Good Housekeeping Seal for their dependability and quality
  • Fabric vanes are suspended between two vertical layers of sheer light diffusing material that also blocks harmful UV rays
  • Shade material can be cleaned ultrasonically or traditionally
  • Vanes overlap each other when closed, blocking the view; however, vanes do not contact each other along the full length of the shading and do not form a perfect seal against light leakage, which is most visible toward the bottom of the shading
  • For outside mount, headrail width will be ordered width plus 3/16" and fabric width will be ordered width minus 3/4"
  • Lifetime Limited Warranty
  • Good Housekeeping is a trademark of Hearst Communications, Inc.
  • Specifications
  • Width 12" - 114"
  • Height 12" - 132"
  • Minimum inside-mount depth 3/4"
  • Minimum flush-mount depth 3 5/8"
  • Minimum outside-mount space 3/4"
  • Headrail depth and height 3 1/8" x 2 7/8"

Please note the following exceptions to the above specifications.

  • Cordless Motorized Wand Lift
  • Width 15" - 120"
  • Minimum inside-mount depth 1"
  • Minimum flush-mount depth 3 3/4"
  • Minimum outside-mount space 1"
  • Headrail depth and height 3 3/4" x 3 3/8"

Your browser is currently running with add-ons disabled.

To customize this product, please make sure that your browser's add-ons and plug-ins are enabled.

Order your blind by following the easy steps below!
step 1

Select a product color: (8 available)

Learn more about product color

Product Color:

Choose a color for your product or select sample swatches to order.

FREE Swatch Samples:

Blindsgalore's Free Swatch Samples program lets you touch and compare fabrics, materials and/or colors before you order your custom window covering.  Simply click the scissor icon to add a free swatch to your cart (if a color doesn't have a scissor icon, swatches are temporarily unavailable for that color).  Order your swatches, then order the perfect color window treatment!

Color Disclaimer:

Although we color-correct each scan as accurately as possible, the colors displayed on your screen may not depict an accurate reproduction of the actual swatch color due to the inconsistencies of various computer monitors.

Biscuit - 3016

Biscuit 3016

Biscuit - 3016
  • Biscuit 3016
Biscuit - 3016
Creamy White - 3001
Dark Khaki - 3019
Spice - 3017
Wedding Gown - 1000
Antique White - 1008
Light Beige - 1002
Sage - 1065
step 2

Select a mount option:

Learn more about mount

Mount refers to whether the treatment will be mounted within the window frame (inside mount) or on the wall surrounding the window (outside mount).

For an inside mount, please provide us with the exact dimensions of the window frame.  Any deductions to the size of your shade will be made by the manufacturer.

For an outside mount, please enter the width and height of the window-covering itself.  We recommend adding at least 4 inches to the width of the window, and 4 inches to the height of the window.  This will allow for proper overlap with the wall.

Inside

Inside

?

Inside mount blinds will fit within the window casing for a clean, custom look.  Enter the actual size of your window casing, NOT the size of your old blind.  We will make the necessary deductions to make the blind fit properly.  Make sure your window meets the minimum inside mount specifications, or flush mount specifications if desired.

?

Outside mount blinds will be installed on the wall above the window, covering the window entirely.  Enter the size you want the finished product to be, including the desired overlap beyond the window.  The ordered height will include the hardware for blinds and shades.  The width of the headrail may be slightly wider than the ordered width to accomodate operating controls and valance returns.  The outside mount option is required if your window is not deep enough to install the blind as an inside mount.

step 3

Select a size:

Single

Single

Single blind

Left blind

Width: inches

Height: inches

Center blind

Width:

Height:

Right blind

Width:

Height:

step 4

Select a lift option:

Learn more about lift

The control which raises and lowers the blind or shade; options vary by product but may include a traditional pull cord, continuous cord control, cordless lift, or motorization.

Continuous Cord

Continuous Cord

?

Loop and clutch system easily positions shade at any height.  Cord loop stays the same length regardless of shade position.  Easily raises even large shades. 

?

The cordless motorized wand is a safe and convenient option to lift and tilt your shades.  Press and release the button on the pendant located at the end of the wand to raise and lower the shade or tilt the vanes open or closed.  When shade is lowered, the vanes can be adjusted to control your view to the outside.  White wand and pendant for shades with standard hardware.  Shades with Oil Rubbed Bronze hardware will be built with black wand and pendant. Buttons will always be white.  Comes with battery wand with 8 alkaline batteries included.

?

Battery-powered motorized operation opens and closes blinds with the touch of a button.  An internal limit stop protects the motors and slats from damage.  One remote control (required) operates multiple blinds.  Remote uses convenient radio frequency technology to operate blinds without requiring line-of-sight.  5-Channel remote operates up to five separate shades.

step 5

Select a valance option:

Learn more about valances

Valances are the decorative piece used as a finishing touch to hide the headrail of a window treatment.  The valance material typically matches the material of the product unless otherwise stated.  Depending on the product, you may be able to choose the valance style, color, or size.

Oil Rubbed Bronze Classic Cassette Headrail

Oil Rubbed Bronze Classic Cassette Headrail

?

Classic cassette headrail system conceals the fabric roll and provides a finished look.

?

Classic cassette headrail system conceals the fabric roll and provides a finished look.

step 6

Select a hardware option:

Learn more about hardware

Your order will come with the necessary hardware for a typical installation based on the options and mount type you have selected.  Additional hardware, such as extension brackets and hold-down brackets, is available for special mounting requirements.  Other hardware, such as cord cleats or extension poles, may also be available.

Extension Brackets

Extension Brackets

For certain windows or doors, extension brackets will be needed (outside mount only) to create room for obstructions like door handles and window crank hardware.  These brackets allow the blind to operate properly.

Certain outside mount blinds will benefit from the use of hold down brackets, such as blinds for doors and windy locations.  Hold down brackets keep the fully lowered blind secured at the bottom rail, using small holes that snap into the bracket.  The blind must be unfastened to raise the shade.  Hold down brackets are designed only for outside mount use.

Used to add a small amount of extra depth to the headrail when installing in order to avoid obstructions such as molding around a window.  Available for outside mount applications only.

last step!

Optional information:

Learn more about optional information

Used on our order forms, the window nickname is one that you assign to the windows in a room.  This helps you keep track of your order when a room has multiple windows.  We recommend including a room name and numbering the windows sequentially (for example, "Bedroom window #2"), but you may use any system you like.

Please address the following issues to continue:
You're done!
Blindsgalore GuaranteeNeed Help Find a Pro

Custom Product Price

1.

Primary Product Color:

Color:
Biscuit
2.

Mount:

Type:
n/a
3.

Size:

Width x Height:
24" x 36"
4.

Remote for lift:

Remote:
n/a
5.

Lift:

Type:
n/a
Position:
n/a
6.

Valance:

Type:
n/a
7.

Hardware:

Ext. Brackets:
n/a
HD Brackets:
n/a
Spacer Blocks:
n/a
Opt.

Information:

Room:
n/a
Nickname:
n/a
$298.60
- $98.60
33% off

Enjoy these special savings

  • Save Today 33% -
    Save 33%
  • + an extra -
    Save 10% Use coupon LOVEBG
    Expires 2/11/2016
$200.00

* Price is not complete until all sizes and options have been selected. Coupon discount reflected in cart.

$298.60
- $98.60
33% off

Enjoy these special savings

  • Save Today 33% -
    Save 33%
  • + an extra -
    Save 10% Use coupon LOVEBG
    Expires 2/11/2016
$200.00

Coupon discount reflected in cart.

Need Help?

Do It Yourself Guides, Expert Advice and Learn About an In-Home Consultation.

501

Sorry, this sample is currently out of stock, but it should be back very soon. Would you like us to e-mail you when it's back in?

Thanks, we'll e-mail you when the sample becomes available.