Good Housekeeping™ Roller Shades: Linens Light Filtering

Inside mount blinds will fit within the window casing for a clean, custom look.  Enter the actual size of your window casing, NOT the size of your old blind.  We will make the necessary deductions to make the blind fit properly.  Make sure your window meets the minimum inside mount specifications, or flush mount specifications if desired.

Outside mount blinds will be installed on the wall above the window, covering the window entirely.  Enter the size you want the finished product to be, including the desired overlap.  The ordered height will include the hardware for blinds and shades.  This option is required if your window is not deep enough to install the blind as an inside mount.

This reliable system raises and lowers the shade with a beaded chain that remains the same length no matter the position of the shade.  The clutch system allows you to raise even very large shades with minimal effort.  The cord tensioner must be properly attached to the wall to operate and to prevent a hazard from the hanging cord.

Go cord-free with this high quality lift system.  A gentle pull on the bottom rail and you can position the shade easily at any height.  This is a much improved system over the old out-of-control spring loaded shades of the old days - the premium spring mechanism gives you controlled and precision operation.  Top-mount only unless ordered with the cassette headrail.

Control your blinds wirelessly with a battery-power motor built into the roller.  Comes with a refillable battery wand that is installed on the wall or ceiling or can be clipped onto the optional cassette headrail.  Requires at least one remote control to operate.  The 5-channel radio-frequency remote has individual frequencies to control up to five separate shades and can operate all shades simultaneously.

Fabric rolls off the front of the shade, hiding the fabric roll.  The fabric on a standard roll shade comes off the back of the roll, which exposes both the roll and the back of the fabric.  Reverse roll shades may offer less light control because the fabric hangs further from the window glass.

Fabric rolls off the back of the shade, allowing the fabric to hang closer to the window for optimal light control.  The back of the fabric will be visible on the roll unless ordered with the optional cassette headrail.

For shades ordered with continuous cord lift, select a chain color to coordinate or contrast with your chosen fabric color.  If ordering with cordless, clutch or motorized lift, select "Not Applicable".

Exposed Metallic Bottom Rail colored hem bar adds a finishing touch and is available in white, bronze, vanilla, black and brushed aluminum colors.

Fabric wrapped colored hem bar adds a finishing touch and is available in white, bronze and black colors.

Complete the look of your shade and conceal the fabric roll and operating mechanism with the UltraSleek Headrail system which features a narrow profile, contoured design and narrow light gap.  Matching fabric insert in the headrail of the shade.  Not available with motorized lift or reverse roll.

Complete the look of your shade and conceal the fabric roll and operating mechanism with the UltraSleek Headrail system which features a narrow profile, contoured design and narrow light gap.  Matching fabric insert in the headrail of the shade.  Not available with motorized lift or reverse roll.