Blindsgalore logo

Good Housekeeping Panel Tracks: Crepe Blackout

Enjoy these special savings

Product Overview

$257.00
(24" x 36")
Change
$383.70
33% off
Current offers:
  • 33% Off Plus -
    Save 20%
    Use coupon ABIGDEAL
    Expires 5/28/2013
  • Free subscription to Good Housekeeping with purchase -

    Get rebate form
Shipping:
Free Shipping†
Special offer:
BillMeLater®

Please Note: Panel tracks are ordered using the overall width of the area being covered, not using individual panel sizes. 

Backed by the Good Housekeeping Seal, these panel track blinds carry Good Housekeeping's Limited Lifetime Warranty and will be replaced or repaired, or the cost refunded if they are found to be defective.  For large patio doors, sliding glass doors, or large windows, panel track blinds are a stylish choice.  They can also be used as room divider in open floor plans.  With fewer panels, they offer a more contemporary and uncluttered look than vertical blinds with many vanes.

In easy-care polyester Crepe Blackout Fabric, Good Housekeeping Panel Track Blinds will block any outside light; perfect for bedrooms, media rooms or anywhere you want complete light control.  Match your Good Housekeeping Panel Track Blinds to other windows with color-coordinated Good Housekeeping Roller Shades and Roman Shades in the same Crepe blackout fabric.  Please note: Panel tracks are ordered using the overall width of the window, not the individual panel sizes.

Overall Customer Rating4 stars from 1 review4 out of 5 based on 1 customer review
Read all reviewswrite a review

System requirements

BlindsGalore supports the following web browsers:

  • IE 6.0+
  • Firefox 2.0+
  • Safari 3.1+
  • Google Chrome

If you are using one of these browsers and are encountering problems, please make sure JavaScript is enabled and refresh the page.

If the problem persists, you may contact us toll-free at (877) 702-5463 to place an order.

  • Good Housekeeping roman shades have earned the Good Housekeeping Seal
  • Note: On inside mount blinds, there will be up to a 1 1/2" light gap on the sides for wand control blinds, and 9/16" light gap for cord control blinds
  • Note: shades used as a room divider will be white to the street
  • Features a fabric-wrapped elliptical bottom rail for an attractive, finished appearance
  • Valance not included standard - optional valances are available at checkout
  • Backed by a Lifetime Limited Warranty
  • Good Housekeeping is a trademark of Hearst Communications, Inc.
  • Specifications
  • Width 24" - 192"
  • Height 24" - 144"
  • Minimum inside-mount depth 4 1/8"
  • Minimum flush-mount depth 4 3/8"
  • Minimum outside-mount space 1 3/4"
  • Headrail depth and height 1 3/4" x 3/4"

Please note the following exceptions to the above specifications.

  • Wand Control Type
  • Height 24" - 108"
  • 4 (Side Stack) Panel
  • Width 32" - 192"
  • 4 (Split Stack) Panel
  • Width 32" - 192"
  • 5 (Side Stack) Panel
  • Width 40" - 192"
  • 6 (Split Stack) Panel
  • Width 48" - 192"
  • 8 (Split Stack) Panel
  • Width 54" - 192"
  • Split Stack
  • Width 60" - 192"

Your browser is currently running with add-ons disabled.

To customize this product, please make sure that your browser's add-ons and plug-ins are enabled.

Order your blind by following the easy steps below!
step 1

Select a product color: (6 available)

Learn more
Iris - 4080793DDK
  • Add free sample to cart
  • Iris 4080793DDK
Iris - 4080793DDK
Chiffon - 4080798DDK
Beach Sand - 4080176DDK
Begal - 4080158DDK
French Roast - 4080168DDK
Raven - 4080858DDK
step 2

Select a mount option:

What are my mount options?
Inside

Inside

Inside mount blinds will fit within the window casing for a clean, custom look.  Enter the actual size of your window casing, NOT the size of your old blind.  We will make the necessary deductions to make the blind fit properly.  Make sure your window meets the minimum inside mount specifications, or flush mount specifications if desired.

Outside mount blinds will be installed on the wall above the window, covering the window entirely.  Enter the size you want the finished product to be, including the desired overlap.  The ordered height will include the hardware for blinds and shades.  This option is required if your window is not deep enough to install the blind as an inside mount.

step 3

Select a size

Need help measuring?
Single

Single

Learn more about headrail options

Single blind

Left blind

Width: inches

Height: inches

Center blind

Width:

Height:

Right blind

Width:

Height:

step 4

Select a control type option:

Learn more about control type
Wand

Wand

Choose the side of the blind on which the control cord for traversing the blind should be positioned.  Consider where the cord will be more easily accessible when the blind is installed; however, controls on the same side as the stack will be less noticeable.  Note: Cord color is White

Choose the side of the blind on which the control cord for traversing the blind should be positioned.  Consider where the cord will be more easily accessible when the blind is installed; however, controls on the same side as the stack will be less noticeable.  Note: Cord color is White

A single wand traverses the blind, eliminating dangling cords.  Wand will be positioned on the opposite side of the stack.  (Wand Color is white)

step 5

Select a stack option:

What are my stack options?
Left Side

Left Side

Panels will gather or "stack" on the left side of the window when the blind is drawn open.

Panels will gather or "stack" on the right side of the window when the blind is drawn open.

The blind will open from the middle and panels will gather evenly on either end of the window.

step 6

Select a panel option:

What are my panel options?
3 (Side Stack)

3 (Side Stack)

The 3-panel configuration is for side stack blinds only with all panels stacking on one side; panel size will vary based on the ordered width.  Panels will overlap 1 1/2".  The "stack" or covered area is equal to the size of one panel, and can be determined by dividing the ordered width by the number of panels (within +/- 1 1/2").  For help ordering a panel track to stack completely off the window, contact our sales team.

This 4-panel configuration is for side stack blinds only with all panels stacking on one side; panel size will vary based on the ordered width.  Panels will overlap 1 1/2".  The "stack" or covered area is equal to the size of one panel, and can be determined by dividing the ordered width by the number of panels (within +/- 1 1/2").  For help ordering a panel track to stack completely off the window, contact our sales team.

This 4-panel configuration is for split stack blinds only - two panels will stack on either side of the blind.  Panel size will vary based on the ordered width.  Panels will overlap 1 1/2".  The "stack" or covered area is equal to the size of one panel, and can be determined by dividing the ordered width by the number of panels (within +/- 1 1/2").  For help ordering a panel track to stack completely off the window, contact our sales team.

The 5-panel configuration is for side stack blinds only with all panels stacking on one side; panel size will vary based on the ordered width.  Panels will overlap 1 1/2".  The "stack" or covered area is equal to the size of one panel, and can be determined by dividing the ordered width by the number of panels (within +/- 1 1/2").  For help ordering a panel track to stack completely off the window, contact our sales team.

The 6-panel configuration is for split stack blinds only - three panels will stack on either side of the blind.  Panel size will vary based on the ordered width.  Panels will overlap 1 1/2".  The "stack" or covered area is equal to the size of one panel, and can be determined by dividing the ordered width by the number of panels (within +/- 1 1/2").  For help ordering a panel track to stack completely off the window, contact our sales team.

The 8-panel configuration is for split stack blinds only - four panels will stack on either side of the blind.  Panel size will vary based on the ordered width.  Panels will overlap 1 1/2".  The "stack" or covered area is equal to the size of one panel, and can be determined by dividing the ordered width by the number of panels (within +/- 1 1/2").  For help ordering a panel track to stack completely off the window, contact our sales team.

step 7

Select a valance option:

What are my valance options?
No valance

No valance

Optional 3" tall valance with matching fabric insert strip is available to complete your look and to cover the track, if desired.  Outside mount valances do not have returns on the side and are made to the ordered size plus 1" on the outside of the valance.

Valance size: 3"
last step!

Optional information:

Learn more

Please address the following issues to continue:
You're done!

Custom Product Price

1.

Primary Product Color:

[edit]
Color:
Iris
2.

Mount:

[edit]
Type:
n/a
3.

Size:

[edit]
Width x Height:
24" x 36"
4.

Control Type:

[edit]
Option:
n/a
5.

Stack:

[edit]
Option:
n/a
6.

Panel:

[edit]
Option:
n/a
7.

Valance:

[edit]
Type:
n/a
Size:
n/a
Opt.

Information:

[edit]
Room:
n/a
Nickname:
n/a
$383.70
- $126.70
33% off
$257.00

* Price is not complete until all sizes and options have been selected. Coupon discount reflected in cart.

$383.70
- $126.70
33% off
$257.00

Coupon discount reflected in cart.

Need Help?

Do It Yourself Guides, Expert Advice and Learn About an In-Home Consultation.

4 stars

"Semi-Happy"

by SarahK from Raleigh, NC on August 13, 2012

The blinds were a bit difficult to install, it took approximately 3 hours, some of the installation issues were error on our own part.  The actual blinds crinkle/dent easily and when we installed them we created wrinkles that we cannot get out.  The blinds are durable and were great.  One other comment, the wand to move the blinds is VERY long.

511rev.171681