Product Details

Bali Drapery: Inverted Pleat

Features & Benefits

• Fullness is based on the style and width of your custom drapery. This results in evenly spaced fullness, providing depth and a luxurious look.
• For pleated style draperies seams fall to the back of the pleat or fold, making them less noticeable. Seam placement cannot be controlled in specialty styles.
• Seamed drapes have patterns matched to assure the pattern is continuous across the drape, creating visual continuity.
• Pleated draperies are pre-pinned based on rod specifications for easy installation.
• Pleated drapes on a pole with rings may “spring back” slightly from their closed position. Manufacturing will add 10% to the width of drapery to allow for privacy and prevent light gap.
• Double turned hem provides weight and stability. Weights are added to each corner of the drapery.
• Liners are added to the back of all drapes (except sheer fabrics) to help protect the fabric from outside elements and increase energy efficiency.
• Mitered corners come standard on all drapery styles.
• Due to construction and/or weight of certain fabrics, a modified hem may be required. These hems will not have mitered corners.

Materials

• Fabric appearance can vary based on lighting and selected liner.
• Fabric can fade gradually over time; fading can occur at a faster rate if exposed to direct sunlight.
• Color may vary between dye lots; to ensure color consistency, please order draperies, Tailored Roman shades, top treatments, and/or cut yardage at the same time.
• If using contrast lining, it is recommended that the lining color be lighter than the primary fabric, to avoid color bleed through.
• Stretching and shrinking can occur; amounts will vary depending on climatic conditions as well as fiber content
• Wrinkling is an inherent characteristic of natural fabrics; please be aware that products may have wrinkling; most wrinkles will fall out after product is hung; see content label on product for ironing and steaming recommendations

Cleaning & Maintenance

Iron and steaming:

• This information is for light touch-ups when installing soft products; most wrinkles will fall out naturally once the product has been hanging for 10 to 14 days.
  • It is EXTREMELY important to follow the iron and steaming guidelines provided on the label
  • When ironing or steaming a product, you should ALWAYS do this on the back side of the product to avoid marking or damaging the face of the fabric.
  • When steaming, use a low steam setting and avoid actually touching the fabric with the steamer.

Our factory will make the following adjustments:

• For inside mount: Do not take any deductions for clearance. The manufacturer will take necessary deductions for a perfect fit.
• For outside mount: The manufacturer makes no deductions on outside mount installations.