Blindsgalore logo

Blindsgalore® Sheer Shadings: 2" Light Filtering

  • Overall Customer Rating5 stars from 42 reviewsRead reviewsWrite a review
  • $195.00
  • Retail: $291.14

    (33% off)
  • + an extra 10% off
    use code BRILLIANT at checkout Expires 9/2
24" x 36"
pick your size

Let the sun in and keep the UV rays out with Blindsgalore Sheer Shades.  Sheer Shades come in a light filtering material with fabric vanes in the middle floating between two layers of sheer fabric.  When open these shades filter up to 35% of the sun's UV rays and up to 95% when closed.  Available in a wide selection of light pastels and whites you are sure to find the perfect color to fit your home's decor. 

Note: For your shade to operate properly, the fabric may be up to 1 1/4" narrower than the width ordered, creating a 5/8" light gap on each side.

Blindsgalore Guarantee

System requirements

BlindsGalore supports the following web browsers:

  • IE 6.0+
  • Firefox 2.0+
  • Safari 3.1+
  • Google Chrome

If you are using one of these browsers and are encountering problems, please make sure JavaScript is enabled and refresh the page.

If the problem persists, you may contact us toll-free at 1 (877) 702-5463 to place an order.

  • Horizontal fabric vanes float between two layers of soft, knitted sheers
  • Be sure to use the smallest height measurement when ordering an inside mount shade - if the shade is too long, the vanes will not close properly
  • Deluxe Headrail with color coodinated fabric insert comes standard
  • Can be ultrasonically or traditionally cleaned
  • For outside mount, headrail width will be ordered width plus 3/16" and fabric width will be ordered width minus 3/4"
  • Lifetime Limited Warranty
  • Specifications
  • Width 12" - 120"
  • Height 12" - 132"
  • Minimum inside-mount depth 3/4"
  • Minimum flush-mount depth 3 3/4"
  • Minimum outside-mount space 3/4"
  • Headrail depth and height 3 1/8" x 2 7/8"

Please note the following exceptions to the above specifications.

  • Continuous Cord Lift
  • Height 12" - 120"
  • Minimum inside-mount depth 1"
  • Minimum flush-mount depth 3.3700"
  • Minimum outside-mount space 1"
  • Headrail depth and height 3.3700" x 3"
  • Cordless Motorized Wand Lift
  • Width 14" - 120"
  • Minimum inside-mount depth 1"
  • Minimum outside-mount space 1"
  • Headrail depth and height 3 3/4" x 3 3/8"
  • Simplicity Motorized Lift
  • Height 12" - 120"
  • Minimum inside-mount depth 1"
  • Minimum flush-mount depth 3.3700"
  • Minimum outside-mount space 1"
  • Headrail depth and height 3.3700" x 3"

Your browser is currently running with add-ons disabled.

To customize this product, please make sure that your browser's add-ons and plug-ins are enabled.

Order your blind by following the easy steps below!
step 1

Select a product color: (16 available)

Learn more
White Linen - 1100
  • White Linen 1100
White Linen - 1100
White - 1000
Oyster - 1006
Pale Linen - 1101
Soft White - 7501
Ivory Linen - 1108
Cream - 1008
Oatmeal - 1002
Toffee - 7516
Khaki Linen - 1118
Fawn - 1029
Mushroom - 7519
Apricot - 7517
Bark - 7569
Charcoal - 7599
Hazel - 1065
step 2

Select a mount option:

What are my mount options?


Inside mount blinds will fit within the window casing for a clean, custom look.  Enter the actual size of your window casing, NOT the size of your old blind.  We will make the necessary deductions to make the blind fit properly.  Make sure your window meets the minimum inside mount specifications, or flush mount specifications if desired.

Outside mount blinds will be installed on the wall above the window, covering the window entirely.  Enter the size you want the finished product to be, including the desired overlap.  The ordered height will include the hardware for blinds and shades.  This option is required if your window is not deep enough to install the blind as an inside mount.

step 3

Select a size:

Need more help?
Measuring Guide
Measuring Video


Single blind

Left blind

Width: inches

Height: inches

Center blind



Right blind



step 4

Select a lift option:

What are my lift options?
Continuous Cord

Continuous Cord

Loop and clutch system easily positions shade at any height.  Cord loop stays the same length regardless of shade position.  Easily raises even large shades.  Headrail system conceals the fabric roll and provides a finished look.

The cordless motorized wand is a safe and convenient option to lift and tilt your shades.  Press and release the button on the pendant located at the end of the wand to raise and lower the shade or tilt the vanes open or closed.  When shade is lowered, the vanes can be adjusted to control your view to the outside.  White wand and pendant for shades with standard hardware.  Shades with Black or Oil Rubbed Bronze hardware will be built with black wand and pendant. Buttons will always be white.  Comes with battery wand with 8 alkaline batteries included.

Enjoy affordable and motorized operation to raise and lower your shade at the push of a button with no external cords.  Motorized operation is controlled by a remote control and operated through radio frequency with 5 individual frequency channels.  Assign your current shade selection to a desired channel on the remote by selecting a preset channel (1-5).  Multiple shades can also be on the same channel to operate all shades at once.  Select "No Remote" if you already preselected a remote option on another shade or have preexisting motorized shades with a remote control.  Remote control must be ordered to operate shades.  8 Alkaline batteries are included in a battery wand.

step 5

Select a hardware color option:

Learn more about hardware color
White Cassette

White Cassette

White aluminum rail with fabric insert.

Give your shades an extra touch of style and upgrade your headrail with the Oil Rubbed Bronze Metallic headrail.  Matching color cords and fabric insert are included with this option.

Upgrade your shades with the Onyx Black headrail.  Matching color cords and fabric insert are included with this option.

step 6

Select a hardware option:

What are my hardware options?
Extension Brackets

Extension Brackets

Extension brackets (outside mount only) are available for windows with obstructions such as door handles.  These brackets offer the extra projection needed to clear the obstruction so the blind operates correctly.

To eliminate the swaying of blinds installed on doors or in windy locations, we recommend the use of hold down brackets.  These brackets snap into holes on the bottom rail of the blind when it is in the fully lowered position.  To raise the blind, it must be unfastened from the bracket.  Hold down brackets are available for outside mount use only.

Used to add a small amount of extra depth to the headrail when installing in order to avoid obstructions such as molding around a window.  Available for outside mount applications only.

last step!

Optional information:

Learn more

Please address the following issues to continue:
You're done!
Need Help Find a ProBlindsgalore Guarantee

Custom Product Price





Width x Height:
24" x 36"

Remote for lift:




Hardware Color:



Ext. Brackets:
HD Brackets:
Spacer Blocks:


- $96.14
33% off

* Price is not complete until all sizes and options have been selected. Coupon discount reflected in cart.

- $96.14
33% off

Coupon discount reflected in cart.

Need Help?

Do It Yourself Guides, Expert Advice and Learn About an In-Home Consultation.

5 stars

"Extreme Value"

by Bob from Texas on September 1, 2011

The shade installation was very easy.  The instructions were right on.  The operation is smoother than our existing Hunter Doudlas shades.

5 stars

"Beautiful blinds"

by June from Jersey from Montclair on August 23, 2011

These blinds are beautiful and easy to install (including the just drilling a screw for the cord tensioner). 

5 stars

"Order these for every window!"

by Carole from Mpls on July 8, 2011

These are the best idea for any window.  Ease in use.  Efficient and multi functional.


Sorry, this sample is currently out of stock, but it should be back very soon. Would you like us to e-mail you when it's back in?

Thanks, we'll e-mail you when the sample becomes available.