Levolor Light Filtering Cellular Shades

How We Calculate Your Custom Fit

Give us your exact window opening size (for inside mounts) or the total area you want to cover (for outside mounts). Our factory handles all the math to make sure your shades fit and move smoothly.

Inside Mount Factory Deductions

(These are for your information; no math is required on your part!)

• Headrail: 1/4" narrower than the width you order
• Fabric Width: Up to 3/8" narrower than the width you order
• Height: Produced at the exact height you order

Outside Mount Factory Deductions

• Headrail: Produced at the exact width you order
• Fabric Width: 1/8" less than the width you order
• Height: Produced at the exact height you order

Note: Finished measurements may vary by approximately 1/8"

Will This Window Treatment Fit My Window?

These window treatments are custom-made to fit most windows. If your window size falls within the width and height range listed below, you’re off to a great start!

• Inside Mount: Your window opening needs a minimum depth to hold the brackets. If your opening is deep enough, you can achieve a flush mount look where the treatment sits entirely inside the opening. Note: If your depth is between the minimum and flush requirements, your treatment will still install securely but may stick out slightly from the window opening.
• Outside Mount: This installs on the wall or trim above your window. It’s ideal for total light control, especially if your windows are not deep enough for an inside mount. Ensure you have enough flat surface space to install the mounting brackets.

General Size and Mounting Requirements

Continuous Cord Loop Lift

• Width 18" - 120"
• Height 6" - 120"
• Minimum inside-mount depth 3/4"
• Minimum flush-mount depth 2 1/8"
• Minimum outside-mount space 1 1/2"
• Headrail depth and height 1 7/8" x 1 3/8"

Continuous Cord Loop Top-Down/Bottom-Up Lift

• Width 24" - 120"
• Height 8" - 144"
• Maximum square feet 100'
• Minimum inside-mount depth 3/4"
• Minimum flush-mount depth 2 1/8"
• Minimum outside-mount space 1 1/2"
• Headrail depth and height 2 1/8" x 1 3/8"

Cordless Lift

• Width 16" - 120"
• Height 12" - 84"
• Minimum inside-mount depth 3/4"
• Minimum flush-mount depth 2 1/8"
• Minimum outside-mount space 1 1/2"
• Headrail depth and height 1 7/8" x 1 3/8"

InMotion Motor Wand Lift

• Width 21" - 120"
• Height 12" - 120"
• Minimum inside-mount depth 3/4"
• Minimum flush-mount depth 2 1/8"
• Minimum outside-mount space 1 1/2"
• Headrail depth and height 2 1/8" x 1 3/8"

InMotion Motorization Lift

• Width 24" - 120"
• Height 12" - 144"
• Maximum square feet 55'
• Minimum inside-mount depth 3/4"
• Minimum flush-mount depth 2 1/8"
• Minimum outside-mount space 1 1/2"
• Headrail depth and height 2 1/8" x 1 3/8"

InMotion TDBU Motorization Lift

• Width 30" - 120"
• Height 18" - 108"
• Maximum square feet 55'
• Minimum inside-mount depth 3/4"
• Minimum flush-mount depth 2 1/8"
• Minimum outside-mount space 1 1/2"
• Headrail depth and height 2 1/8" x 1 3/8"

Top Down/Bottom Up Cordless Lift

• Width 16" - 96"
• Height 12" - 84"
• Minimum inside-mount depth 3/4"
• Minimum flush-mount depth 2 1/8"
• Minimum outside-mount space 1 1/2"
• Headrail depth and height 1 7/8" x 1 3/8"