Common window measuring mistakes (and what to do if your blinds don’t fit)

Common window measuring mistakes (and what to do if your blinds don't fit)

The most common measuring mistakes are mixing up inside and outside mount measurements, rounding the wrong way, measuring the old blinds instead of the window, taking only one measurement instead of three, and subtracting your own deductions. Each one is easy to avoid with a steel tape measure and a few extra minutes. And if a custom order still arrives the wrong size, the Blindsgalore Guarantee covers mis-measured window coverings for 30 days after you receive them.

Over 99% of our customers measure and install their own window treatments, so you’re in good company. Here’s how to get it right the first time.

Why does measuring matter more for custom blinds than stock sizes?

Stock blinds come in set sizes, so you pick the closest one and live with the gaps or cut them down. Custom blinds are built to the exact numbers you give us, down to the 1/8 inch. That precision is what makes a custom shade fit so cleanly, but it also means the shade can only be as accurate as your measurements.

Two tools make the job easy:

  • A steel tape measure. Our measuring guides call for steel because it stays straight and rigid.
  • A pencil and paper. Write down every measurement, labeled by room and window, as width first and height second.

Then, before you start, check the depth of your window frame. Each product lists its minimum inside-mount depth, and that number decides whether an inside mount will work at all.

Mistake #1: Confusing inside mount and outside mount measurements

An inside mount and an outside mount are measured differently, and mixing them up is the most common reason a shade doesn’t fit.

Features Inside mount Outside mount
Where it goes Inside the window frame On the wall or trim around the window
What you measure The exact opening The area you want to cover
Width Narrowest of three measurements Opening plus about 3 inches (1 1/2 inches per side)
Height Longest of the three measurements Opening plus at least 4 inches above the trim for brackets
Deductions Our factory takes them None taken

Decide on the mount before you measure, and note it next to each window. If your frame is too shallow for an inside mount, measure for an outside mount instead. Outside mounts need at least 2 inches of flat space for the brackets, and they also give better blackout results.

Mistake #2: Rounding to the wrong fraction, or the wrong direction

Rounding isn’t the mistake. Rounding the wrong way is. Our measuring guide asks for measurements to the nearest 1/8 inch, with a specific direction for each:

  • Inside mount width: Round down to the nearest 1/8 inch, so the shade fits inside the frame.
  • Inside mount height: Round up to the nearest 1/8 inch, so the shade reaches the sill.
  • Outside mount: Round to the nearest 1/8 inch.

The errors that cause trouble are rounding to the nearest half or whole inch, or rounding an inside width up. A shade that’s even slightly too wide won’t fit into the frame. Read the tape carefully and record the exact fraction.

Mistake #3: Measuring the old blinds instead of the window

Your old blinds were made with their own deductions and may not have fit well in the first place. Measuring them just copies those problems into your new order. Always take the blinds down or measure around them, and measure the window opening itself.

Our post on Why You Shouldn’t Measure Your Old Blinds When Ordering New Ones goes into more detail.

Mistake #4: Measuring width and height only once

Few window frames are perfectly square. A frame can be a little narrower at the top than the bottom, or taller on one side. One measurement won’t catch that.

For an inside mount:

  1. Measure the width at the top, middle, and bottom. Record the shortest.
  2. Measure the height at the left, middle, and right. Record the longest.
  3. Measure the depth, and note anything that sticks out into the frame, like window cranks or locks.

For an outside mount, measure the width and height of the full area you want to cover, across the center of the window.

Mistake #5: Subtracting your own deductions

For inside mounts, give us the exact opening and let our factory take the standard deductions that help the shade operate smoothly. If you subtract a little “just to be safe,” the factory takes its deduction on top of yours, and the shade ends up too narrow with light gaps at the sides. For outside mounts, no deductions are taken, so the number you send is the width you’ll get.

What should you do if your order doesn’t fit?

First, don’t panic, and don’t force it. Most fit problems can be solved, and some turn out to be an installation issue rather than a sizing issue.

  1. Check your order right away. Open and inspect everything when it arrives, and report anything incorrect, damaged, or defective within seven days of delivery.
  2. Compare the label to your notes. Make sure the size on the order matches what you measured, and confirm the mount type.
  3. Review the installation. Our installation guides show bracket placement for every product. New to installing? Our ranking of the Easiest Blinds to Install Yourself walks through what each style involves.
  4. Call our team. Our in-house experts can troubleshoot with you at (877) 702-5463.

If the shade truly doesn’t fit, the Blindsgalore Guarantee is your safety net:

  • Mis-measured products are covered.
  • Request an exchange within 30 days of receiving your order, through our customer service team.
  • The guarantee covers up to four window coverings per household, and each one can be replaced once.
  • You can choose a different product, as long as it covers the original window.
  • If the replacement costs more, you pay the difference. If it costs less, the difference isn’t refunded.
  • Shutters and custom graphic shades aren’t covered, so measure those with extra care.

We’d love for exchanged items to go to a local charity, such as Habitat for Humanity or Goodwill, instead of the landfill.

Before you order, take a few minutes with the guide. Visit our measuring guide at blindsgalore.com/measuring. Love your view.

Frequently asked questions

The five most common mistakes are mixing up inside and outside mount measurements, rounding the wrong way, measuring old blinds instead of the window, measuring width and height only once, and subtracting your own deductions. A steel tape measure and three measurements per side prevent most of them.

Mis-measured products are covered by the Blindsgalore Guarantee. Contact our customer service team within 30 days of receiving your order to request an exchange. The guarantee covers up to four window coverings per household, excluding shutters and custom graphic shades.

For an inside mount, round the width down and the height up to the nearest 1/8 inch. For an outside mount, round to the nearest 1/8 inch.

No. Give us the exact opening, and our factory takes the standard deductions. Subtracting your own makes the shade too narrow.

We recommend adding about 3 inches to the width (1 1/2 inches on each side) and at least 4 inches above the trim for the brackets. Overlap helps reduce light gaps and improves privacy.

No. Measure the window opening itself. Old blinds may have been made with different deductions or may not have fit correctly to begin with.